The universal bike was created after years of producing catering bikes and contains all the most important elements necessary for everyday work.
It is prepared for a full range of accessories without any changes.
It is also a device with the largest mass-produced storage box available on the market, with a capacity of 728 l, and the largest tabletop with dimensions of 300×80 cm. The bike has hydraulic brakes with a parking function, gears built into the rear hub and a foldable frame for easy transport. The bike can also be easily transformed into a rickshaw or a trailer that can be pulled behind a typical electric bike. This device is ideal for both catering and advertising stands.
The universal bike was created after years of producing catering bikes and contains all the most important elements necessary for everyday work.
It is prepared for a full range of accessories without
any changes.
It is also a device with the largest mass-produced
storage box available on the market, with a capacity
of 728 l, and the largest tabletop with dimensions
of 300x80 cm.
The universal bike is available with an umbrella and a plexiglass separating the bike from the customer. This is a simpler version of the basic bike.
It is dedicated as a "promotional" bike, but can be used to sell the same products as the standard version. Additional tops on the front and back of the box are optional.
A rickshaw is an ideal solution for those who don’t need to move their sales stand and don’t need so much storage and exhibition space.
The rickshaw is equipped with two large,
inflatable wheels and one smaller, foldable
one. It has a separating plexiglass, a shelf on
the service side and is equipped with a sink.
It will work well at events, in shopping centres
and as an interesting form of furniture in a
hotel or bar.
The rickshaw is prepared for the installation of a special drawbar, with which we can pull it with a typical bicycle.
This solution makes transport much
easier for those who don’t have a large car
or need to get to harder-to-reach places
The drawbar can be easily detached, and
the foldable wheel can be unfolded at the
target work site.
The universal ice bike is equipped with a freezing device that can fit 7 pozzetti’s + 5 spares.
The electrical installation allows for independent work in the field for about 8 hours. As standard, it is equipped with a separating plexiglass and an umbrella, but at the customer's request it can be equipped with a foldable fabric roof and side shelves. Additional tops on the front and back of the box are optional.
Features of Universal bike
The frame can be folded in half, which makes transporting the bike much easier. Thanks to this solution, we can easily transport the bike in a shorter car or put it in a small room.
The bike frame is designed to carry heavy loads while looking light. The whole thing can be easily unscrewed from the base if necessary, turning the bike into a rickshaw. It is prepared for the installation of an electric drive, standard derailleur’s and an optional rear brake.
The bike is equipped with strong, 19-inch motorcycle wheels. Thanks to this, they carry heavy loads. The front wheels are easily removable with one screw. The rear wheel is standard and equipped with built-in derailleur’s.
The most powerful brakes available on the market guarantee safety while riding, and the parking brake option makes it easier to park the catering bike at the place of intended work.
The bike is standard equipped with Shimano Nexus 3 derailleur’s, which are mounted in the hub. This makes it easier to move through various terrains.
The bike uses a bent handle. The handlebar can be easily adjusted to the desired height for comfortable driving, and we can lower it to install an additional worktop or support the bike for transport.
The casing is made of the highest quality stainless steel, which means that the bike, which is exposed to weather conditions, can easily cope with them and is not subject to corrosion. Additionally, the entire work surface is hygienic, easy to keep clean, and approved for contact with food products.
The box with a size of 1400x800x650 mm is the largest available, standard product on the market. It has a capacity of over 720 liters. There is a partition inside, which, depending on your needs, can be installed in three different positions or completely dismantled. The box can accommodate a nano gas cylinder and 11 kg. The box has a number of mountings, so we can easily transform it into a rickshaw, trailer or installation accessory.
The side shelves provide additional space for product presentation. They are equipped with holes in which we can mount dedicated accessories. The shelves can be easily unscrewed and replaced with Plexiglas’s, separating you from the customer.
In the front part, the bike has an additional opening tabletop measuring 650×800 mm. The tabletop has holes on the sides for inserting accessories such as additional shelves or a waste bin.
The bike has an additional tabletop, which is mounted between the front and rear boxes. Its dimensions are 960×800 mm. After finishing work, the table-top folds in half and fits into the front box.
The bike has a sink where you can wash your hands and handy accessories. Connected to a water tank that can be easily refilled and a dirty water tank. The dirty water tank is emptied using an easily accessible valve.
Clean water tank with a capacity of 18 l. Both the clean and dirty water tanks can be easily removed from the cabinet for washing.
To increase the storage space, instead of the rear trunk, we installed a box with dimensions (mm) 600x430x440 h, which has been prepared for the installation of a refrigerator or can serve as a warehouse. It is equipped with a number of holes for mounting accessories.
The entire roof is made of stainless steel. It has special holes for mounting accessories and dedicated lighting. The roof height can be easily adjusted using special hooks. If necessary, the entire roof can be dismantled by unscrewing a few screws.
The bikes are equipped with a reliable power system in versions with gel and lithium-ion batteries. The installation displays the charge level and is equipped with a charger.
The rickshaw is equipped with a braked, single wheel that can be folded under the box.
As an accessory, it is possible to install a drawbar, thanks to which the rickshaw turns into a trailer. The drawbar holder is mounted on 4 screws, and the drawbar itself is pulled out after reaching the work site. A foldable rickshaw wheel should be installed together with the drawbar, which can be folded while driving and unfolded at the workplace.
Variants
Colours of steel box
Available variants for wrapping
Material roof colors
Universal bicycle packaging
Bikes and rickshaws are packed in special boxes, thanks to which we can be sure that they will arrive undamaged. They are prepared for transport with a pallet truck and made of chipboard. The whole thing is prepared for simple assembly of all the elements, which must be done on your own.
Rickshaw packaging
1500x900x1300h
Bike packaging
1500x900x1600h
We send our products to over 50 countries in the world
Within Europe, our products are shipped by private transport, which guarantees safety. They can be shipped entirely “on wheels” or in specially prepared crates.
In the case of container shipments, there is the possibility of transport by sea or air.
Bike technical data
Total dimensions (mm):
3450 x 1100 x 2320 h
Worktop dimensions (mm):
1400 x 800 + 650 x 800 + 960 x 800
Space in the storage box (mm):
930 x 780 x 580 h
Space in the rear storage box(mm):
600 x 440 x 470 h
Weight (kg):
220
Derailleurs in the rear wheel:
Shimano Nexus 3
Electric drive:
optional
Brake type:
hydraulic with parking option
Box material:
stainless steel
Table top material:
stainless steel
Roof type:
umbrella
Capacity:
250 kg
Front wheel size:
19” x 2,25
Rear wheel size:
19” x 2,25
Rickshaw technical data
Total dimensions (mm):
1550 x 1000 x 1180 h
Worktop dimensions (mm):
1400 x 800
Space in the storage box (mm):
930 x 780 x 580 h
Space in the rear storage box (mm):
600 x 440 x 470 h
Weight (kg):
125
Derailleurs in the rear wheel:
no
Electric drive:
no
Brake type:
hydraulic with parking option
Table top material:
stainless steel
Construction of the roof:
optional
Roof type:
optional
Capacity:
250 kg
Front wheel size:
19” x 2,25
Rear wheel size:
125 mm, braked
The universal bike was created after years of producing catering bikes and contains all the most important elements necessary for everyday work.
It is prepared for a full range of accessories without any changes.
It is also a device with the largest mass-produced storage box available on the market, with a capacity of 728 l, and the largest tabletop with dimensions of 300×80 cm. The bike has hydraulic brakes with a parking function, gears built into the rear hub and a foldable frame for easy transport. The bike can also be easily transformed into a rickshaw or a trailer that can be pulled behind a typical electric bike. This device is ideal for both catering and advertising stands.
The universal bike was created after years of producing catering bikes and contains all the most important elements necessary for everyday work.
It is prepared for a full range of accessories without
any changes.
It is also a device with the largest mass-produced
storage box available on the market, with a capacity
of 728 l, and the largest tabletop with dimensions
of 300x80 cm.
The universal bike is available with an umbrella and a plexiglass separating the bike from the customer. This is a simpler version of the basic bike.
It is dedicated as a "promotional" bike, but can be used to sell the same products as the standard version. Additional tops on the front and back of the box are optional.
A rickshaw is an ideal solution for those who don’t need to move their sales stand and don’t need so much storage and exhibition space.
The rickshaw is equipped with two large,
inflatable wheels and one smaller, foldable
one. It has a separating plexiglass, a shelf on
the service side and is equipped with a sink.
It will work well at events, in shopping centres
and as an interesting form of furniture in a
hotel or bar.
The rickshaw is prepared for the installation of a special drawbar, with which we can pull it with a typical bicycle.
This solution makes transport much
easier for those who don’t have a large car
or need to get to harder-to-reach places
The drawbar can be easily detached, and
the foldable wheel can be unfolded at the
target work site.
The universal ice bike is equipped with a freezing device that can fit 7 pozzetti’s + 5 spares.
The electrical installation allows for independent work in the field for about 8 hours. As standard, it is equipped with a separating plexiglass and an umbrella, but at the customer's request it can be equipped with a foldable fabric roof and side shelves. Additional tops on the front and back of the box are optional.
Features of Universal bike
Variants
Colours of steel box
Available variants for wrapping
Material roof colors
Universal bicycle packaging
Bikes and rickshaws are packed in special boxes, thanks to which we can be sure that they will arrive undamaged. They are prepared for transport with a pallet truck and made of chipboard. The whole thing is prepared for simple assembly of all the elements, which must be done on your own.
Rickshaw packaging
1500x900x1300h
Bike packaging
1500x900x1600h
We send our products to over 50 countries in the world
Within Europe, our products are shipped by private transport, which guarantees safety. They can be shipped entirely “on wheels” or in specially prepared crates.
In the case of container shipments, there is the possibility of transport by sea or air.
Bike technical data
Total dimensions (mm):
3450 x 1100 x 2320 h
Worktop dimensions (mm):
1400 x 800 + 650 x 800 + 960 x 800
Space in the
storage box (mm):
930 x 780 x 580 h
Space in the rear
storage box(mm):
600 x 440 x 470 h
Weight (kg):
220
Derailleurs in the rear wheel:
Shimano Nexus 3
Electric drive:
optional
Brake type:
hydraulic with parking option
Box material:
stainless steel
Table top material:
stainless steel
Roof type:
umbrella
Capacity:
250 kg
Front wheel size:
19” x 2,25
Rear wheel size:
19” x 2,25
Rickshaw technical data
Total dimensions (mm):
1550 x 1000 x 1180 h
Worktop dimensions (mm):
1400 x 800
Space in the
storage box (mm):
930 x 780 x 580 h
Space in the rear
storage box (mm):
600 x 440 x 470 h
Weight (kg):
125
Derailleurs in the rear wheel:
no
Electric drive:
no
Brake type:
hydraulic with parking option
Table top material:
stainless steel
Construction of the roof:
optional
Roof type:
optional
Capacity:
250 kg
Front wheel size:
19” x 2,25
Rear wheel size:
125 mm, braked